Brine Titanium And Titanium Alloy Centrifugal Pump
  • Brine Titanium And Titanium Alloy Centrifugal Pump

Brine Titanium And Titanium Alloy Centrifugal Pump

Brand DALIAN KEHUAN PUMP

Product origin DALIAN,LIAONING,CHINA

Delivery time THREE MONTHS

Supply capacity SUFFICIENT SUPPLY

Kehuan pump make a comprehensive breakthrough in the status quo of magnetic pumps (such as High power, High temperature, Mud, Easy vaporization, High melting point, etc.)
Design framework: We use European advanced hydraulic model;
Design standards according to American petroleum institute standard API685.
High standard material application: Permanent magnet (Sm2Co17, Temp. -196~450℃), Sliding bearing (SSIC), Containment shell(HC-276), Rolling bearing (SKF/NSK), Coupling (Wuxi Chuang ming) /German KTR), Electric motor (Nan yang/Jiamusi).

Brine Titanium And Titanium Alloy Centrifugal Pump

Brine Titanium And Titanium Alloy Centrifugal Pump

Product attributes:

Maximum head :>150m

Maximum fiow:>400L/min

Driving type:Motor

Working impeller number:Single-Stage Pump

Working Pressure:Middle Pressure Pump

Working impeller inlet way:Single Suction Pump

Pump shaft positon:Horizontal Pump

Pump shell combination:Horizontal Split Pumps

Installation height:Suction Centrifugal

Impeller structure:Closed

Transportation package:Wooden Case

Specification:API 610 standard 

Trademark:Dalian Kehuan Pump Co.,Ltd

Origin:Dalian,Liaoning,China

Size: 1-16 inches

Flow:0~2600m3/H

Capacity: 0-2600 m3/h

Head: 0-240m

Temperature: -80-300 °C

Pressure:~2.5MPa

API 610 OH1.jpg

}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller

}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry  radial impeller, end suction branch, radially upwards discharge branch.

}Depending on operating conditions hydraulic balance provided by front or rear wear rings and balance holes. Casing cover with cooling or heating connections ,

 shaft sealing by packings or mechanical seals of any design (single or double seal design ), connections for cooling, flushing or sealing liquid.

}Standardize pipework according to API plans

}Flange possible according to GB, DIN, or ANSI

Material:
Carbonsteel; chromed steel; austenitic stainless steel; duplex steel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials; It depends the customer's request.


S-5

S-6

C-6

S-8

A-7

A-8

D-1

D-2

Casing

Cast steel

Cast steel

CA15/CA6NM

Cast steel

AUST SS

316 AUS

DUPLEX

SUPER DUPLEX

Impeller

Cast steel

12%CR

CA15/CA6NM

316 AUS

AUST SS

316 AUS

DUPLEX

SUPER DUPLEX

Shaft

AISI4140

AISI4140

SS420

316N

AUST SS

316N

2205

2507

Wear rings

12%CR

12%CR

12%CR

316 Hard faced

AUST SSHard faced

316 Hard faced

Duplex Hard faced

SUPER Duplex 
Hard faced

Bearing Frame

Cast steel

Cast steel

Cast steel

Cast steel

Cast steel

Cast steel

Cast steel

Cast steel

微信图片_20201229160702.jpg

Suitable for pumping clean or polluted, cold or hot, chemically neutral or corrosive liquids.
Apply for refineries, petrochemical industry, coal processing, fertilizer, power auxiliary circulation, heating and air-conditioning, zone heat supply, paper and pulp, water & wastewater, general industry.
Foot-mounted,single-stage ,overhung,horizontal
For pumping clean and slightly polluted,cold or hot .chemically neutral or aggressive liquids
In refineries, petrochemical industry, coal processing and cryogenic engineering
In chemical, fibre and general processing industries,particularly in paper and general processing industries,particular in paper and pulp industries and sugar industry
In water industry,particular sea water desalination plants
In heating and air conditioning plants and condensate recovery
In auxiliary circuits of power stations
In environmental protection engineering
In ship and offshore industries


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right