Single Stage Overhung Centrifugal Pump

Brand DALIAN KEHUAN PUMP

Product origin DALIAN,LIAONING,CHINA

Delivery time THREE MONTHS

Supply capacity SUFFICIENT SUPPLY

Kehuan pump make a comprehensive breakthrough in the status quo of magnetic pumps (such as High power, High temperature, Mud, Easy vaporization, High melting point, etc.)
Design framework: We use European advanced hydraulic model;
Design standards according to American petroleum institute standard API685.
High standard material application: Permanent magnet (Sm2Co17, Temp. -196~450℃), Sliding bearing (SSIC), Containment shell(HC-276), Rolling bearing (SKF/NSK), Coupling (Wuxi Chuang ming) /German KTR), Electric motor (Nan yang/Jiamusi/Dazhong ).

Email

Single Stage Overhung Centrifugal Pump

Single Stage Overhung Centrifugal Pump

Basic Information：

Delivery term: 3 months after receiving the advance payment.

Validity of quotation:three months from the date of the present quotation.

Payment Item: 30% down payments , 70% before delivery.

Transportation package:Wooden Case

Trademark:Dalian Kehuan Pump Co.,Ltd

Origin:Dalian,Liaoning,China

Product attributes:

Maximum head :>150m

Maximum fiow:>400L/min

Driving type:Motor

Working impeller number:Single-Stage Pump

Working Pressure:Middle Pressure Pump

Working impeller inlet way:Single Suction Pump

Pump shaft positon:Horizontal Pump

Pump shell combination:Horizontal Split Pumps

Installation height:Suction Centrifugal

Impeller structure:Closed

Specification:API 610 standard

API610 OH1 (Foot mount pump)

}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller

}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller, end suction branch, radially upwards discharge branch.

}Depending on operating conditions hydraulic balance provided by front or rear wear rings and balance holes. Casing cover with cooling or heating connections ,

shaft sealing by packings or mechanical seals of any design (single or double seal design ), connections for cooling, flushing or sealing liquid.

}Standardize pipework according to API plans

}Flange possible according to GB, DIN, or ANSI

}Size: 1-16 inches

}Flow:0~2600m3/H

}Capacity: 0-2600 m3/h

}Head: 0-240m

}Temperature: -80-300 °C

}Pressure:~2.5MPa

Material:
Carbonsteel; chromed steel; austenitic stainless steel; duplex steel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials; It depends the customer's request.

	S-5	S-6	C-6	S-8	A-7	A-8	D-1	D-2
Casing	Cast steel	Cast steel	CA15/CA6NM	Cast steel	AUST SS	316 AUS	DUPLEX	SUPER DUPLEX
Impeller	Cast steel	12%CR	CA15/CA6NM	316 AUS	AUST SS	316 AUS	DUPLEX	SUPER DUPLEX
Shaft	AISI4140	AISI4140	SS420	316N	AUST SS	316N	2205	2507
Wear rings	12%CR	12%CR	12%CR	316 Hard faced	AUST SSHard faced	316 Hard faced	Duplex Hard faced	SUPER Duplex Hard faced
Bearing Frame	Cast steel	Cast steel	Cast steel	Cast steel	Cast steel	Cast steel	Cast steel	Cast steel

Suitable for pumping clean or polluted, cold or hot, chemically neutral or corrosive liquids.
Apply for refineries, petrochemical industry, coal processing, fertilizer, power auxiliary circulation, heating and air-conditioning, zone heat supply, paper and pulp, water & wastewater, general industry.
Foot-mounted,single-stage ,overhung,horizontal
For pumping clean and slightly polluted,cold or hot .chemically neutral or aggressive liquids
In refineries, petrochemical industry, coal processing and cryogenic engineering
In chemical, fibre and general processing industries,particularly in paper and general processing industries,particular in paper and pulp industries and sugar industry
In water industry,particular sea water desalination plants
In heating and air conditioning plants and condensate recovery
In auxiliary circuits of power stations
In environmental protection engineering
In ship and offshore industries.

API 610 Oh2 Centrifugal Pumps

Size: 1-16 inches

Flow:0~2600m3/H

Capacity: 0-2600 m3/h

Head:0~300m

Temperature: -80~450 Degrees Celsius

Pressure:~5MPa

Suitable for pumping clean and slightly polluted, cold or hot, chemically or aggressive liquids
In refineries
In petrochemical plants
In cryogenic engineering
In coal processing
In chemical industry, fibre industry and general processing industry
In auxiliary circuits of power plants
In medium-sized and large heating and air-conditioning plants
In environmental protection engineering
In offshore industry and seawater desalination plants
Material:
*Same as above

Product Tag:

Get the latest price? We'll respond as soon as possible(within 12 hours)